ElectroHolography Laboratory

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

==mask_draft1.m==
'%' means the start of a comment

    name = 'test_low_freq17';
    filename='';%in case you want to add something else onto the file name besides what's stored in 'name'
    dxfname=strcat(filename,name,'.dxf');
    [fid,err]=DXF_start(dxfname,1); %the opening of the file starts in DXF_start
    xbias = 0; %xbias is the spacing between a whole set of  transducers and another set of transducers
    DmakeDevice_1Tgrating(150,50,80,2500,fid,xbias,'test_low_freq17')
    xbias = 16000;
    DmakeDevice_1Tgrating(200,100,80,2500,fid,xbias,'test_low_freq17')
    xbias = xbias + 16000;
    DmakeDevice_1Tgrating(400,200,80,2500,fid,xbias,'test_low_freq17')
    DXF_end(fid) %where the dxf file is written
    
==DmakeDevice_1Tgrating.m==

    function out=DmakeDevice_1Tgrating(startf,stopf,xscale,yscale,fid,xbias,name)
    %units are inches in cad and microns in final program
    lambda=633e-9;
    n_e=2.3;
    % start center stop frequency
    vxeff=3960;%effective velocities from experimental data (accounting for reflection)
    vyeff=4500;
    vy=3909; %freespace velocity
    FV1=[430,490]*1e6;
    %freq=120;
     FH1=[startf,stopf]*1e6;
     FH2=[150,150]*1e6;
     FH3=[200,200]*1e6;
     FH4=[250,250]*1e6;
     FH5=[300,300]*1e6;
     FH6=[400,400]*1e6;
     FH7=[500,500]*1e6;
     FH8=[600,600]*1e6;
     FH9=[700,700]*1e6;
     FH10=[800,800]*1e6;
    Fcomb=[FH1;FH2;FH3;FH4;FH5;FH6;FH7;FH8;FH9;FH10];
    Fc=(Fcomb(:,1)+Fcomb(:,2))./2;
    Bragg=asind(lambda*Fc./(2*vy*n_e));
    biasf=700*1e6;
    biasb=asind(lambda*biasf./(2*vy*n_e));
    bias_offset=2*biasb;
    Bragg=bias_offset-Bragg;
    %make a bias at
    startl=vy./(4*Fcomb(:,1));
    startl=startl*1e6;
    vstartl=vxeff./(4*FV1(1));
    vstartl=vstartl*1e6;
    stopl=vy./(4*Fcomb(:,2));
    stopl=stopl*1e6;
    vstopl=vxeff./(4*FV1(2));
    vstopl=vstopl*1e6;
    startl
    stopl
    sense='c'; %clockwise for 'c', counterclockwise for 'cc'
    vertex='tr';
    %N=200;
    %xscale=100;
    paddim=10; %this is the length and width of the pad?
    buswidth=10;
    %yscale=2000;
    ydim=yscale/4;%period size
    %fprintf(fid,'****HCHIRP DATA**** \n sense %s\n vertex %s\n xscale %g\n paddim %g\n buswidth %g\n ',sense,vertex,xscale, paddim, buswidth);
    HTnum=size(Fcomb(:,1));
    for index=1:1%HTnum %NUMBER OF ROWS, why does it make the 2nd row offset to the left?
       % DXFTRYgrating(fid,sense,vertex, N,xscale,Bragg(index),startl(index),stopl(index),paddim,buswidth,index);
    N=round(ydim/mean([startl(index),stopl(index)]));
     %N=100;%************************************************Change THIS***************  
       DXFTRYgrating(xbias,fid,sense,vertex, N,xscale,90',startl(index),stopl(index),paddim,buswidth,index); %do i need the apostrophy after theta?
    end
    end
    
==Dmakerect.m==
    function out=Dmakerect(sense,vertex)
    %returns a box expressed as a 2xN matrix of coors starting at the specified
    %vertex: tr, tl, br, bl
    %and drawn in the given sense: c, cc etc.
    %canonx=[0,0,1,1]; %clockwise bottom left
    %canony=[0,1,1,0];
    canonx=[0,0,250,250]; %this is for the wirebonding pads/busses %250 makes it 2500um long, 3 makes 30um high
    canony=[0,9,9,0];
    canoncoors=[canonx;canony];
    %********Starting Point and Sense*******
    switch vertex
       case {'tr','topright'}
          if sense=='clockwise'|'c'| 'clk' | 'clock'
            canoncoors=circshift(canoncoors,[1,2]);
            canoncoors=[canoncoors,canoncoors(:,1)];%first point becomes last point
          else
            canoncoors=circshift(fliplr(canoncoors),[1,1]);
            canoncoors=[canoncoors,canoncoors(:,1)];%first point becomes last point
          end
          %disp('start top right')
       case {'tl','topleft'}
          if sense=='clockwise'|'c'|'clk' | 'clock'
            canoncoors=circshift(canoncoors,[1,1]);
            canoncoors=[canoncoors,canoncoors(:,1)];%first point becomes last point
          else
            canoncoors=circshift(fliplr(canoncoors),[1,2]);
            canoncoors=[canoncoors,canoncoors(:,1)];%first point becomes last point
          end
          %disp('start top left')
       case {'br','bottomright'}
          if sense=='clockwise'|'c'|'clk' | 'clock'
            canoncoors=circshift(canoncoors,[1,3]);
            canoncoors=[canoncoors,canoncoors(:,1)];%first point becomes last point
          else
            canoncoors=circshift(fliplr(canoncoors),[1,0]);
            canoncoors=[canoncoors,canoncoors(:,1)];%first point becomes last point
          end
          %disp('start bottorm right')
       case {'bl','bottomleft'}
          if sense=='clockwise'|'c'|'clk' | 'clock'
            canoncoors=circshift(canoncoors,[1,0]);
            canoncoors=[canoncoors,canoncoors(:,1)];%first point becomes last point
          else
            canoncoors=circshift(fliplr(canoncoors),[1,3]);
            canoncoors=[canoncoors,canoncoors(:,1)];%first point becomes last point
          end
          %disp('start bottom left')
    end
    %********
    out=canoncoors;
ElectroHolography Laboratory

User Tools

Site Tools

Page Tools
