==== Blue Team Test Rig Quest #1: Design test tube testing rig ==== ---- Status: Active - Brenden Due: May 4th Description: The goal of this project is to design a test set-up meant to hold a laser, focal lens, and mount on/into a test tube. Inside this test tube there are two cantilever arms, one holding particles, and the other holding an adhesive which will be used (at least initially) to pull out the particle from the optical trap. It will also include a optical silencer inside the test tube, past the arms, that the laser will enter into and be absorbed into to prevent back-scatter and undesired spread of the laser.