====Nov 4- Dec 2, 2016====

  * Last mission
{{:kamran:mission.jpg?700|}}

  * My PhD prospectus defense: <fc #98fb98>I passed!</fc>

{{:kamran:prospectus_def.pdf|}}

  * Start writing the sandwich paper

------------------------

====Oct 28- Nov 4, 2016====

  * Glued 3 devices and wirebonded (Only two are working very efficiently)
 {{:kamran:sandwich_stack.jpg?400|}}

 * Testing the glued device separately
 {{:kamran:deflected.jpg?400|}}

  * Setup for testing the sandwich device
{{:kamran:setup_sand.jpg?400|}}
------------------------

====Oct 21-28, 2016====

  * 3 completed and tested devices
{{:kamran:sandwich.jpg?400|}}

  * DAQRI Near-Eye display in place and tested
{{:deliverables:20161028_130052.jpg?400|}}

  * 3D print a mount for the sandwich device
{{:kamran:mount_sandwich.png?400|}}

------------------------
====Oct 14-21, 2016====

  * <fc #6495ed>Complete Fabrication of 3 samples for Sandwich project!</fc>

{{:kamran:img_9143.jpg?400|}}

  * <fc #6495ed> Fabrication test with samples on 90 degrees Hot Plate for 7 minutes!</fc>

Left images are the developed gratings and right images are the etched gratings. I haven't done hard bake before etching the samples.

**<fc #ff0000>15 % Does Test:</fc>**

{{:kamran:15_.jpg?300|}}
{{:kamran:15_ethed.jpg?300|}}

**<fc #ff0000>21 % Does Test:</fc>**

{{:kamran:21_.jpg?300|}}
{{:kamran:21_ethed.jpg?300|}}

**<fc #ff0000>27 % Does Test:</fc>**

{{:kamran:27_.jpg?300|}}
{{:kamran:27_ethed.jpg?300|}}

**<fc #ff0000>32 % Does Test:</fc>**

{{:kamran:32_.jpg?300|}}
{{:kamran:32_ethed.jpg?300|}}


--------------------
====Oct 7-14, 2016====

{{:kamran:img_0308.jpg?300|}}

{{:kamran:near_eye_display_holochip_section.docx|}}


------------------