**__//this page is out of date - DH, Wed 3 Aug 2016//__**

====== Monitor To-Do List ======

^ Priority / General Goal ^ Deadline ^ Status ^
| Create demonstration videos | | ongoing (latest work Thu 5 Nov 2015) |
| Implement wide-angle monitor output for simultaneous L/R eye viewing | | |
| Clean/organize office/lab space |  |  |

^ Purchasing ^ Status ^
| Arduinos | @lightyellow: **Zach** assn'd Thu 5 Nov 2015 |
| Support card components (clarify) | @lightyellow: **Zach** assn'd Thu 5 Nov 2015 |
| MiniCircuit ADE-2 Mixers | @lightyellow: **Drew** assn'd Thu 5 Nov 2015 |
| HA13535 polygon mirror replacement driver | @lightblue: **Drew** ordered Mon 19 Oct 2015 |

^ Implementation ^ Status ^
| Support cards for Gold Monitor | @lightyellow: **Zach** assn'd Thu 5 Nov 2015 |

^ Design ^ Status ^
| Remove image "void" region from intermittent transformation steps | @lightyellow: **Cameron** assn'd Thu 5 Nov 2015 |
| Find Power vs. Perceived Brightness graph for grayscale correction | @lightyellow: **Cameron** assn'd Thu 5 Nov 2015 |
| Determine efficient image<->holoimage coordinate transformation algorithm to skip Matlab preprocessing | @lightyellow: **Cameron** assn'd Thu 5 Nov 2015 |
| PLL design analysis and breadboard proof-of-concept implementation for Sync CCA schematic & component overhaul | @lightyellow: **Zach** assn'd Thu 5 Nov 2015 |
| Minimize blanking intervals in resolution settings | @lightyellow: **Drew** assn'd Thu 5 Nov 2015 |
| Unbrick rogue Arduino | @lightyellow: **Drew** Thu 5 Nov 2015 |
| Map monitor input amplitude to deflected output beam power | @lightyellow: **Drew** Thu 5 Nov 2015 |
| Post the Charley revelation emails | @lightyellow: **Drew** assn'd Thu 5 Nov 2015 |
| MixAmp band-pass filter incorrect performance cause/remedy study | |
| MixAmp power loss cause/remedy study | |
| MixAmp harmonics/distortion cause/remedy study | |
| "De-bar" uploaded Youtube videos | @lightgreen: **Drew** __[[monitor:drew#thu_5_nov_2015|completed]]__ Thu 5 Nov 2015 |
| Create Monitor To-Do List in Wiki | @lightgreen: **Drew** completed Thu 5 Nov 2015 |

====== Monitor Team ======

This team builds holographic video monitors from scratch.
Their primary goals are to deliver two monitors to DAQRI in the next few weeks, to create compelling content and to publish on a completed 18 channel modulator.

We are currently building two types of modulators
ISOMET bulk AOM modulator
18 Channel Waveguide modulator

GENERAL
  - Build 4 monitors at least, two in the next few weeks.
  - Create content make butterfly 3d models, and other impressive content, understand and implement MIT algorithms
  - replace GPUs analog inputs with converted digital inputs enlist the help of DAQRI's president, Andy (andy@daqri.com) and Jim Barabas MIT PhD that worked on problems like this for years, barabas@gmail.com.
  - Improve optical input design for waveguides with gratings
  - Have replacement architecture for scanning assembly with custom 3d printed pieces.
  - Help Miles build Giant Yoda display

----

SPECIFIC\\

Drew (Team Leader)
  * github
  * manual

Cameron
  * box
  * github
  * manual
  * Weekly Docuwiki Backup

Ben
  * 3 prong holder
  * cast small hilt
  * test small asphere

Zach (Team Leader until Drew gets back)
  * (First two weeks) Learn how to show angle and focus on the display.  Complete the purchase of new driving computer.  Be ready to give a presentation on how to make a monitor before Cameron leaves (Fri May 1st)
  * (Broader Impacts) Assist outreach group
  * Design Asphere system for the AOMs in the box
  * Characterize parameters such as resolution, frame rate and viewangle.
  * Test and create content for monitors.  
  * Write Journal article

Boyd
  * Assembly holovideo monitor