This is the page where the awesomest stuff happens. Also a lot of junk. So here we go.
Contact Info
I won't respond to your calls unless I know who you are, but you can text, I guess: 8018003589 toph1990@gmail.com
Create resistor-free EO design for x cut, then hand it off to Jacob K as soon as possible.
Create resistor-free EO design for z cut
CURRENT:
Full Wafer: ?, pneumatic focus
Sample: hmds, 5 mw @ 60%
OLD:
Full Wafer: no hmds, 2.8 mW @ 60%, pneumatic focus
Sample: hmds, 2.5 mw @ 40%
Here is the link to the V-line of samples
The thick blade is .016“ thick = .4064 mm.
It has .165” exposed, or 4.19 mm.
Important Papers
Bortz paper – This paper talks about APE waveguides.
Do paper – This paper addresses guided-to-leaky mode conversion.
Paper that shows how proton exchange works