Table of Contents
Nov 4- Dec 2, 2016
- Last mission
- My PhD prospectus defense: I passed!
- Start writing the sandwich paper
Oct 28- Nov 4, 2016
- Glued 3 devices and wirebonded (Only two are working very efficiently)
* Testing the glued device separately
- Setup for testing the sandwich device
Oct 21-28, 2016
- 3 completed and tested devices
- DAQRI Near-Eye display in place and tested
- 3D print a mount for the sandwich device
Oct 14-21, 2016
- Complete Fabrication of 3 samples for Sandwich project!
- Fabrication test with samples on 90 degrees Hot Plate for 7 minutes!
Left images are the developed gratings and right images are the etched gratings. I haven't done hard bake before etching the samples.
15 % Does Test:
21 % Does Test:
27 % Does Test:
32 % Does Test:
