this page is out of date - DH, Wed 3 Aug 2016

Monitor To-Do List

Priority / General Goal Deadline Status
Create demonstration videos ongoing (latest work Thu 5 Nov 2015)
Implement wide-angle monitor output for simultaneous L/R eye viewing
Clean/organize office/lab space
Purchasing Status
Arduinos Zach assn'd Thu 5 Nov 2015
Support card components (clarify) Zach assn'd Thu 5 Nov 2015
MiniCircuit ADE-2 Mixers Drew assn'd Thu 5 Nov 2015
HA13535 polygon mirror replacement driver Drew ordered Mon 19 Oct 2015
Implementation Status
Support cards for Gold Monitor Zach assn'd Thu 5 Nov 2015
Design Status
Remove image “void” region from intermittent transformation steps Cameron assn'd Thu 5 Nov 2015
Find Power vs. Perceived Brightness graph for grayscale correction Cameron assn'd Thu 5 Nov 2015
Determine efficient image↔holoimage coordinate transformation algorithm to skip Matlab preprocessing Cameron assn'd Thu 5 Nov 2015
PLL design analysis and breadboard proof-of-concept implementation for Sync CCA schematic & component overhaul Zach assn'd Thu 5 Nov 2015
Minimize blanking intervals in resolution settings Drew assn'd Thu 5 Nov 2015
Unbrick rogue Arduino Drew Thu 5 Nov 2015
Map monitor input amplitude to deflected output beam power Drew Thu 5 Nov 2015
Post the Charley revelation emails Drew assn'd Thu 5 Nov 2015
MixAmp band-pass filter incorrect performance cause/remedy study
MixAmp power loss cause/remedy study
MixAmp harmonics/distortion cause/remedy study
“De-bar” uploaded Youtube videos Drew completed Thu 5 Nov 2015
Create Monitor To-Do List in Wiki Drew completed Thu 5 Nov 2015

Monitor Team

This team builds holographic video monitors from scratch. Their primary goals are to deliver two monitors to DAQRI in the next few weeks, to create compelling content and to publish on a completed 18 channel modulator.

We are currently building two types of modulators ISOMET bulk AOM modulator 18 Channel Waveguide modulator

GENERAL

  1. Build 4 monitors at least, two in the next few weeks.
  2. Create content make butterfly 3d models, and other impressive content, understand and implement MIT algorithms
  3. replace GPUs analog inputs with converted digital inputs enlist the help of DAQRI's president, Andy (andy@daqri.com) and Jim Barabas MIT PhD that worked on problems like this for years, barabas@gmail.com.
  4. Improve optical input design for waveguides with gratings
  5. Have replacement architecture for scanning assembly with custom 3d printed pieces.
  6. Help Miles build Giant Yoda display

SPECIFIC

Drew (Team Leader)

Cameron

Ben

Zach (Team Leader until Drew gets back)

Boyd