• Last mission

• My PhD prospectus defense: I passed!

prospectus_def.pdf

• Start writing the sandwich paper

• Glued 3 devices and wirebonded (Only two are working very efficiently)

* Testing the glued device separately

• Setup for testing the sandwich device

• 3 completed and tested devices

• DAQRI Near-Eye display in place and tested

• 3D print a mount for the sandwich device

• Complete Fabrication of 3 samples for Sandwich project!

• Fabrication test with samples on 90 degrees Hot Plate for 7 minutes!

Left images are the developed gratings and right images are the etched gratings. I haven't done hard bake before etching the samples.

15 % Does Test:

21 % Does Test:

27 % Does Test:

32 % Does Test:

near_eye_display_holochip_section.docx