The Fusion Silvertouch Power Mach4 Turbo Customplus Platinum Team 7000 Mega™
Cartridges
Holochip Fabricators
Near Eye Display
Primary Researcher
Unassigned
Traitorous Rebels
D9 was proton exchanged for 10 minutes and annealed for 45 minutes.
Prepped with pmma and aqua save for ESEM.
Written in ESEM at Spot 5 for long transducers, developed for 1 minute.
Evaporated 200nm Aluminum, placed in NMP for liftoff.
Liftoff was successful.
Sign
Low F
Mid F
High F
Smith Charts and SWR for each port Before Impedance Matching (As counted from the top):
| T1 | T2 | T3 |
|---|---|---|
 |  |  |
 |  |  |
| T4 | T5 | T6 |
 |  |  |
 |  |  |
After Impedance Matching (As counted from the top):
| T1 | T2 | T3 |
|---|---|---|
 |  |  |
 |  |  |
| T4 | T5 | T6 |
 |  |  |
 |  |  |
The day after impedance matching all the Mid and High transducers had a circle around the outside of the Smith Chart.
Under the microscope they look like this:
Low F
Mid F
High F
Close Up
Update 5/26/2015: Now every transducer on this device is displaying the open circle. I believe that all the transducers on this device are broken. It appears that a signal greater than 25 Dbm causes one of the busses to overload and burn up.
Clean off and reuse.
Sample fabricated by Jacob Kimball
page updated 26 May 2015
