User Tools

Site Tools


samples:e10

E10

Past:

X-cut. NOT PROTON EXCHANGED.

Written with new EO device without a resistor bridge. 3mm wide at spot 30. Only lifted off in center.

Cleaned completely.

RB E10

Current:

Two samples exist with this number one is a Resistor Bridge EO with 200nm of Chrome.

It looks like the following:
E10_T1
E10_T2
E10_T3

Layout

6■____■7
5■¯¯¯¯■8

4■____■9
3■¯¯¯¯■10

2■____■11
1■¯¯¯¯■12

RB EO Resistance

1-2: 6.3kΩ
5-6: 300kΩ
7-8: 740kΩ
11-12: 1.5kΩ

Current

The old resistive strips were removed and 50nm of NiCr were put in their place. A 45 min anneal was done at 350°C. As can bee seen pads 1-2 and 3-4 did not connect with the resistive strip.

It now looks like the following:
E10b_T1
E10b_T2
E10b_T3

Layout

1■____■7
2■¯¯¯¯■8

3■____■9
4■¯¯¯¯■10

5■____■11
6■¯¯¯¯■12

RB Resistance

11-12: 441kΩ

Future:
samples/e10.txt · Last modified: 2015/08/05 09:51 by sgneitin