This is where I will report my weekly deliverables in group meeting. This is a separate page from my personal research log.

At the top of this page will be the MOST RECENT deliverable, with previous deliverables below. If your deliverables tend to take a lot of space, please separate them with horizontal lines across the page.

I have been working on having the monitor automatically sink the revolution of the polygon mirror with the input pulse of the images from the computer. This has been delayed due to difficulties in measuring these inputs (hard time reading D_SYNC and P_TACH).

The plan is to do the following:

Phase 1: Turn up the motor to max speed (This step is completed)

Phase 2: exponentially decrease the motor speed until the mirror period is near the period of the D_SYNC/locked into phase.
(Having a hard time detecting D_SYNC and P_TACH on the arduino)

Phase 3: Constantly check to see if there is a phase difference, and adjust motor speed accordingly. (again waiting on accurate readings of P_TACH and D_SYNC)